
Case 580T 580ST Backhoe Loaders Service Manual
580T
580ST
590ST
695ST
This manual has been printed for a skillful engineer to supply necessary technical information to carry out service operations on this machine carefully read this manual to collect correct information relevant to repair procedures
SERVICE MANUAL
The Service Manual consists of two volumes:-580T – 580ST – 590ST – 695STService Manual for “Backhoe loader”-580T – 580ST – 590ST – 695STService Manual for “Engine”
The Service Manuals for “Backhoe loader” and“Engine” contain the necessary technical information to carry out service and repair on the machine and on the engine, necessary tools to carry out those operations and information on service standard, on procedures for connection, disconnection, disassembly and assembly of parts The Service Manual which covers the backhoe loader models Case Repair Manual 580T – 580ST – 590ST – 695STconsists of the following volumes, which can be identified through their print number as stated below:
SECTION 00 – SAFETY RULES
FOREWORD
SAFETY
INSTRUCTIONS
PREVENTION
EXPLOSIONS
PREVENTION OF BURNS
PRECAUTIONS FOR WASTE DISPOSAL
Backhoe loaders 580T – 580ST – 590ST – 695ST have been designed to perform most earth-moving operations. If you use this machine for duties involving the use of attachments, accessories, or special tools, consult your Dealer to make sure that the adaptations or modifications carried out are in conformity with the machine’s technical specifications and with current regulations on safety.
Any modifications or adaptations which are not approved by the manufacturer may invalidate the machine’s original conformity with safety requirements. The machine must be used according to its intended use, respecting the safety and precautionary rules and strictly following the operating instructions. Any functional disorders, especially those affecting the safety of the machine, should therefore be rectified immediately.
Carefully read this Operator’s Manual and store it in the cab for quick location and reference. Instructions concerning safety, operation, and maintenance have been developed to permit safe serv-ice and repair of this machine without any risk. In the event of queries or suggestions relevant to your machine do not hesitate to address them to your dealer.
Dealers have qualified and trained personnel at disposal as well as Original Spares, means, and equipment suitable to carry out all necessary maintenance. Any modifications or adaptations which are not approved by the manufacturer may invalidate the machine’s original conformity with safety requirements.
each machine is supplied complete with a copy of this Manual. Descriptions and illustrations provided herein are not binding.
The Manufacturer, provided that the basic characteristics of machine types described and shown in this Manual remain the same, reserves the right to change components, parts and accessories supplied without any commitment to timely update this publication, and this any time it deems it convenient for improvement purposes or due to commercial or manufacturing requirements.
For exact information, please consult your dealer or contact the Manufacturer’sBranch Offices, who remain at your disposal for further help.
SPARE PARTS
The “non-genuine” spare parts have not been checked and authorized by the Manufacturer. The assembly and/or use of such products may have negative effects on the machine design features and could impair its operation safety. The Manufacturer is not liable for any damage caused by “non-genuine” spare parts or accessories.
WARRANTY
This machine is under warranty according to the regulations in force in Your Country and in compliance with the sales agreement drawn up with the dealer. The warranty, however, expires if the operation and maintenance instruction for this machine and contained in this manual, have not been followed.
Case 580T 580ST Backhoe Loaders Service Manual