John Deere 130G Diagnostic Test Manual
TM12554
Technical manuals are divided in two parts: repair and operation and tests. Repair sections tell how to repair the components. Operation and tests sections help you identify the majority of routine failures quickly.
Information is organized in groups for the various components requiring service instruction. At the beginning of each group are summary listings of all applicable essential tools, service equipment and tools, other materials needed to do the job, service parts kits, specifications, wear tolerances, and torque values.
Technical Manuals are concise guides for specific machines. They are on-the-job guides containing only the vital information needed for diagnosis, analysis, testing, and repair.
Fundamental service information is available from other sources covering basic theory of operation, fundamentals of troubleshooting, general maintenance, and basic type of failures and their causes.
Entanglements in moving parts can cause serious injury.
Stop engine before examining, adjusting, or maintaining any part of machine with moving parts.
Keep guards and shields in place. Replace any guard or shield that has been removed for access as soon as service or repair is complete.
OPERATION AND TEST MANUAL (T3/S3a) models 130G (PIN: 1FF130GX__D040001 – )
10SEP15 (ENGLISH)
For complete service information also see:
130G Excavator Repair (PIN: 1FF130GX_
_D040001-)
TM12557
JD Link (MTG) Technical Manual TM114519 Power Tech E 4.5 and 6.8L Diesel Engines
Level 16 Electronic Fuel System With Denso HPCR
Power Tech 4.5L & 6.8L Diesel Engines Tier 1/Stage I, Tier 2/Stage II, Tier 3/Stage IIIA, Tier 3/Stage IIA Tier 3/Stage III, (Base Engine)
JDLINK/ZXLINK Machine Monitoring System
CTM502
CTM104
CTM10006
John Deere 130G Diagnostic Test Manual
Table of contents
TECHNICAL INFORMATION FEEDBACK FORM
Section 9000 – GENERAL INFORMATION
Group 01 – Safety
Section 9001 – DIAGNOSTICS
Group 10 – Main Controller (MCZ) Diagnostic Trouble Codes Group 20 – Engine Control Unit (ECU) Diagnostic Trouble Codes Group 30 – Monitor Controller (DSZ) Diagnostic Trouble Codes
Group 40 – Air Conditioner Controller (ACF) Diagnostic Trouble Codes
Section 9005 – OPERATIONAL CHECKOUT PROCEDURE
Group 10 – Operational Checkout Procedure
Section 9010 – ENGINE
Group 05 – Theory of Operation Group 15 – Diagnostic Information Group 20 – Adjustments
Group 25 – Tests
Section 9015 – ELECTRICAL SYSTEM
Group 05 – System Information Group 10 – System Diagrams Group 15 – Sub-System Diagnostics Group 16 – Monitor Operation Group 20 – References
Section 9020 – POWER TRAIN
Group 05 – Theory of Operation Group 15 – Diagnostic Information
Section 9025 – HYDRAULIC SYSTEM
Group 05 – Theory of Operation Group 15 – Diagnostic Information Group 25 – Tests
Section 9031 – HEATING AND AIR CONDITIONING
Group 05 – Theory of Operation Group 15 – Diagnostic Information Group 25 – Tests
Section 9900 – DEALER FABRICATED TOOLS
Group 99 – Dealer Fabricated Tools.
