B2650 Kubota Tractor Operators Manual
This is the COMPLETE Operators Manual for the Kubota B2650, B3350, B3350SU Tractor.
Table of Content of the Workshop Service Manual
This b2650 Kubota tractor Manual Describes Procedures for Operation, Handling, Lubrication, Maintenance, Checking, and Adjustment. It Will Help The Operator and Maintenance Personnel Realize Peak Performance Through Effective, Economical, and Safe Machine Operation, and Maintenance.”
– Information
This section primarily contains information below.
- Safety First
- Safety Decal
- Specifications
- Dimensions
– General
This section primarily contains information below. - Engine Identification
- Model Identification
- General Precautions
- Maintenance Check List
- Check and Maintenance
- Special Tools
– Mechanism
This section contains information on the structure and the function of the unit. Before you continue with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870 / 9Y021-18200) for the diesel engine / tractor mechanism that this workshop manual does not include.
– Servicing
This section primarily contains information below. - Troubleshooting
- Servicing Specifications
- Tightening Torques
- Checking, Disassembling and Servicing All illustrations, photographs and specifications contained in this manual are of the newest information available at the time of publication
Models Covered: b2650 Kubota tractor
Kubota B2650 Tractor
Kubota B3350 Tractor
Kubota B3350SU Tractor
| Administrators MANUAL CONTAINS: |
|---|
| Safe Operation |
| Overhauling OF TRACTOR |
| Details |
| Detail TABLE |
| Voyaging SPEEDS |
| Carry out LIMITATIONS |
| INSTRUMENT PANEL AND CONTROLS |
| PRE-OPERATION CHECK |
| Every day CHECK |
| Working THE ENGINE. |
| EXHAUST AFTER-TREATMENT DEVICES |
| Diesel Oxidation Catalyst and Diesel Particulate Filter (PDF) Muffler |
| Taking care of Points |
| PDF Regeneration Process |
| Recovery Operating Procedure |
| PM Warning Level and Required Procedures |
| Tips on DPF Regeneration |
| Turning over THE ENGINE |
| Square Heater (Option) |
| Halting THE ENGINE |
| Heating UP |
| Warm-up Transmission Oil at Low Ambient Temperatures |
| Kicking off |
| Working THE TRACTOR |
| Working NEW TRACTOR |
| Try not to Operate the Tractor at Full Speed for the First 50 Hours |
| Changing Lubricating Oil for New Tractors |
| Loading up AND LEAVING THE TRACTOR |
| Working FOLDABLE ROPS |
| To Fold the ROPS |
| To Raise the ROPS to Upright Position |
| Change of Foldable ROPS |
| Beginning |
| Administrators Seat |
| Safety belt |
| Slant Steering Adjustment |
| Headlight/Turn Signal/Hazard Light Switch |
| Farm truck Lights |
| Brake Pedals (Right and Left) |
| Reach Gear Shift Lever (L-M-H) |
| Front-Wheel Drive Lever |
| Hand Throttle Lever |
| Stopping Brake |
| Speed Control Pedal |
| Speed Set Device |
| Halting |
| CHECK DURING DRIVING |
| Promptly Stop the Engine if: |
| Simple Checker ™ |
| LCD MONITOR |
| Fuel Gauge |
| Coolant Temperature Gauge |
| Hour meter/Tachometer |
| Changing Display Mode |
| Working TECHNIQUES |
| Differential Lock |
| Working the Tractor on a Road |
| Working on Slopes or Rough Terrain |
| Transport the Tractor Safely |
| Headings for Use of Power Steering |
| Kubota B2650 B3350 B3350SU Tractor Operators Manual |
| PTO |
| PTO OPERATION |
| PTO Select Lever |
| PTO Clutch Lever |
| LCD Monitor Message |
| Fixed PTO |
| 3-POINT HITCH and DRAWBAR |
| 3-POINT HITCH |
| Choosing the openings of lifting bars and lower joins |
| Choosing the Top Link Mounting Holes |
| Draw bar |
| Lifting Rod (Right) |
| Top Link |
| Adjustable Stabilizers |
| Check Chains |
| DRAWBAR |
| Changing Draw bar Length |
| Hydraulic UNIT |
| 3-POINT HITCH CONTROL SYSTEM |
| Position Control |
| Hydraulic Control |
| 3-point Hitch Lowering Speed |
| Assistant HYDRAULICS |
| Hydraulic Block Type Outlet |
| Double REMOTE HYDRAULIC CONTROL SYSTEM |
| Control Lever and Hydraulic Hose Connections |
| Loader/Remote Control Valve Lever |
| Valve Lock |
| Hydraulic Control Unit Use Reference Chart |
| TIRES, WHEELS, AND BALLAST |
| TIRES |
| Tire Pressure |
| Double Tires |
| WHEEL ADJUSTMENT |
| Front Wheels |
| Rear Wheels |
| Tracks |
| Weight |
| Front Ballast |
| Rear Ballast |
| Upkeep |
| ADMINISTRATION INTERVALS |
| Lubricants, FUEL, AND COOLANT |
| Biodiesel Fuel (BDF) |
| Scheduled SERVICE |
| Waste DISPOSAL |
| How to OPEN THE HOOD |
| Hood |
| Engine Side Cover |
| Daily CHECK |
| Walk Around Inspection |
| Checking and Refueling |
| Checking Engine Oil Level |
| Checking Transmission Fluid Level |
| Checking Coolant Level |
| Cleaning Evaluator Valve |
| Checking Air Inlet Pipe |
| Cleaning Grill and Radiator Screen |
| Checking DPF Muffler |
| Checking Brake Pedal |
| Checking Gauges, Meter, and Easy Checker (TM) |
| Checking Head Light, Hazard Light, etc. |
| Checking Seat Belt and ROPS |
| Checking and Cleaning of Electrical Wiring and Battery Cables |
| Checking Movable Parts |
| Every X hours |
| Greasing Grease Fittings |
| Checking Engine Start System |
| Checking Wheel Bolt Torque |
| Every X hours |
| Checking Battery Condition |
| Cleaning Air Cleaner Primary Element |
| Cleaning Fuel Filter |
| Changing Fan Belt Tension |
| Changing Brake |
Choices
Reference sections
File
Model Specification: Kubota B2650, B3350, B3350SU Tractor
Language: English
Record Format: PDF
Prerequisites: Adobe PDF Reader
Viable: All Versions of Windows and Mac, Linux OS, iPhone, Ipad, Android, and so forth.
Kubota B2650 B3350 B3350SU Tractor Operators Manual