Daewoo Doosan Dl450-3 Wheeled Loader Service Parts Catalogue Manual

Specifications Doosan Dl450-3 Wheeled Loader Parts Manual:
Engine Number Of Cylinders
Engine Make 2347
Engine Model QSM11
Net Power 301hp
Power Measured 1900rpm
Max Torque 1165lb ft
Displacement 659cu in
Torque Measured 1400rpm
Aspiration Turbocharged with Intercooler
Operational
Operating Weight
55834.3lb
Fuel Capacity 101.8gal
Hydraulic System Fluid Capacity 63.5gal
Engine Oil Fluid Capacity 9gal
Cooling System Fluid Capacity14.6gal
Transmission Fluid Capacity 14.3gal
Front Axle/Diff Fluid Capacity 13.5gal
Rear Axle/Diff Fluid Capacity 13.5gal
Static Tipping Weight 38752.9lb
Turning Radius 23.2ft in
Operating Voltage 24V
Alternator Supplied Amperage 70amps
Transmission Type Powershift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed – Forward 23.7mph
Max Speed – Reverse 11.9mph
Hydraulic System Raise Time 6.5sec
Dump Time 1.9sec
Lower Time 4.1sec
Doosan Dl450-3 shop Load sensing hydraulic system This system provides maximum hydraulic performance, without producing excess capacity.
This saves fuel and extends the lifetime and reliability of vital components such as the pumps and MCV valves.
Limited slip differentials Limited slip differentials at the front and rear automatically ensure maximum tractive effort and easy driving over soft and muddy ground with no need for a manual differential lock. They also reduce the risk of skidding and prevent excessive tyre wear. The brake discs in the planetary reduction gears are reinforced, ensuring long hours of operation and easy maintenance access.
Hydraulic differential locks are available as an option. Two modes are available. In manual mode, the operator can use a foot switch to lock the differential completely. Alternatively, it can be automatically engaged, depending on transmission torque, in the first and second gears.
Doosan Dl450-3 Wheeled Loader Parts Manual
INDEX
- General Maintenance
- Engine
- Drivetrain
- Brake
- Steering
- Frame
- Tank
- Hydraulics
- Electrical System