Jcb WLS 467 Factory Service Shop Manual
Full workshop & solution handbook with electric circuitry representations for JCB Wheeled Filling Shovel (WLS) 467. It coincides service manual utilized by dealers that assured to be completely useful as well as intact without any missing page.
This JCB Rolled Packing Shovel (WLS) 467 service & repair manual (including maintenance, overhaul, taking apart & putting together, change, tune-up, operation, inspecting, diagnostic & troubleshooting …) is divided right into different areas. Each area covers a certain component or system with thorough illustrations.
EXCERPT:
467 Rolled Packing Shovel
Area 1 – General Info
Area 2 – Treatment as well as Safety
Area 3 – Upkeep
Section A – Add-ons
Area B – Body as well as Structure
Area C – Electrics
Area E – Hydraulics
Area F – Transmission
Area G – Brakes
Area H – Steering
Section K – Engine
Hemorrhaging the System
Jcb WLS 467 Factory Service Shop Manual
! MWARNING.
Before waging the bleeding treatment it is very important to ensure that the park brake is involved which one set of wheels is blocked on both sides.
BRAK-1-2.
Keep in mind: The braking systems are fed from the primary hydraulic system and also include brake collectors.
These allow around 9 applications of the brakes with the engine stopped.
Hemorrhage each axle separately:.
— Affix a tube to the brake bleed screw, situated near the axle centre. Ensure that the cost-free end of television is submersed in liquid consisted of in an ideal container.
— Open up the brake hemorrhage screw as well as fully depress the brake pedal. Hold the pedal completely depressed until air cost-free liquid flow from the bleed screw.
— Shut the brake bleed screw with the pedal totally dispirited.
Repeat the treatment for the back axle.