This is the COMPLETE Operators & Parts Manual for the Kubota 50Snowblower – BX2750D.
Repairing a snowblower can vary depending on the specific issue you’re facing. However, here are some general steps to follow when repairing a snowblower:
Safety first: Before working on your snowblower, ensure that the engine is off and the spark plug wire is disconnected to prevent accidental starts. Also, remove any accumulated snow or debris from the machine.
Identify the problem: Determine what is wrong with your snowblower. It could be a clogged chute, a worn-out belt, a faulty spark plug, or any number of issues. Inspect the machine carefully to identify the specific problem area.
Consult the manual: If you have the owner’s manual for your snowblower, it can be a valuable resource. It will provide you with specific instructions, diagrams, and troubleshooting tips tailored to your model. Review the manual to understand the repair process and recommended maintenance procedures.
Gather necessary tools: Depending on the repair required, you might need a variety of tools such as wrenches, pliers, screwdrivers, socket sets, and possibly some specialized tools. Make sure you have the necessary tools before proceeding.
Replace or repair parts: Once you’ve identified the faulty component, you may need to replace it. Order the replacement part from a reputable dealer or the manufacturer. Follow the instructions in the manual to remove the damaged part and install the new one correctly. If the part is not replaceable, you might need to repair it or seek professional assistance.
This Manual Describes Procedures for Operation, Handling, Lubrication, Maintenance, Checking, and Adjustment. It also describes and illustrates assemblies, subassemblies, and detail parts needed for service replacement. It Will Help The Operator and Maintenance Personnel Realize Peak Performance Through Effective, Economical and Safe Machine Operation and Maintenance.
Kubota 50 snowblower Bx2750d Operators Manual
FOR BX SERIES, B7300, B7400HSD, B7500DT/HSD, B7510DT/HSD, B7610HSD, B2410, B2320, B2620 AND B2920 TRACTORS
SERIAL NO. 2800426 AND UP
Operators & Parts Manual Contains:
INTRODUCTION
SAFETY PRECAUTIONS
Before Operation
Notice
Subframe & Snowblower
Before Operation
Subframe & Snowblower Operation
Maintenance
DECALS
ASSEMBLY
Snowblower Assembly
Chute Installation
Manual Rotation Installation
Manual Rotation Installation on BX1850, BX2350, BX2660 and BX24 Tractors
Manual Rotation Installation on B2320, B2620 & B2920 Tractors
Attaching Snowblower to theTractor
Removing Snowblower from the Tractor
OPERATION
General Preparation
Operating Controls
Engine Speed
Up and Down Control
Increasing Traction and Stability
Engaging the Drive Mechanism
Deflector Adjustment
Skid Shoe Adjustment
Snow Removal Methods
MAINTENANCE
Maintenance
Gearbox and Reduction Box
Shear Bolts
Auger Repositioning
Drive Chain Tension Adjustment
Lubrication
PARTS
Introduction
Snowblower Assembly BX2750D
Chute with Deflector
Manual Chute Rotation
Worm Gearbox Assembly
Reduction Box Assembly
Driveline Female Half (70060-03224)
AVAILABLE OPTIONS
AVAILABLE EQUIPMENT
TORQUE SPECIFICATION TABLE